Finished 'Birth of Mary' Chair

Okay, here's the finished chair.  This is based on a painting done about 1510, by Hans Holbein from what appears to be a series of paintings on the birth of Mary, the mother of Jesus entitled "The First Bath".  It gets a bit confusing about what the actual name of the piece is, so I'll leave that to the art historians.  I started by calling it the 'Birth of Mary' chair, so I'm sticking with that.

Here's the original. (Taken from an on-line art print seller.)

Basically, a friend of mine asked, "Can you make me that chair?".  Of course, I said.  In the main, the chair is fairly straight forward, with the exception of the finial details on the back-posts.  So, I snagged the highest resolution image I could and zoomed in.

At first, I thought the top was faceted, and maybe the sides, after looking closer, I thought it might be smoother, and after drawing it out several ways, I thought that a more smooth approach would fit in with the chair better.

I'll post a "how it was made" entry later since I'm out of time right now.

Here's the finished project.  Hope you like it.  If anyone wants one, it's $375 the way it is.  This is in Cherry, with a split reed woven seat.  The shape can be modified a fair amount and different woods can be used to meet your style or pocketbook.

Finished chair photos courtesy of   Victoria Dye Photography

Progress on the "Birth of Mary" Chair

Things are going well.  Finished all the fitting and the upper rail joinery.  The decorative elements on the upper rail are moderately indistinct, so I improvised a bit.  Three holes, with carved concave edges, similar to Gothic tracery carving (but a whole lot simpler).

Here's the current status of the chair.  It pretty much looks like a frame because that's what it is.  Once the seat goes on, it'll miraculously transform into a chair.

Round Post Joinery

One of the questions I get (along with the head-tilt) when people look at turned furniture is "how do you make the mortises in something round?"

Well, you could hold it in place and freehand drill it.  Or, you could make one of these and do it on the drill press.

Cutting the second set of holes

It's basically a series of blocks cut at angles and glued to a base board.  All of the blocks are cut exactly the same, so they automatically center whatever is put in the middle.  My original set up for this is HUGE and is ungainly, so I decided to make a much more minimalist jig.

Cutting the first two holes is easy, just line up the bit with the incised line (what, you thought those were just for decoration?) and drill away.

What you see in the picture is cutting the second set of holes, which are 90 degrees from the first.  To make sure the holes are at 90, I put one of the chair rails in place and use my speed square (the gray triangle thingy) which has a level on it.  I put the level on the chair rail and adjust the rail up and down until it's level.  This guarantees the second set of holes is perpendicular.

It takes longer to explain than it does to just do it.  It's pretty straightforward.   The biggest advantage for making them this way is that you don't have to mark up your pieces.  The leg is almost at its finished state.  The last thing I want to do is mark it up.

First fitting

I had already put the mortise holes in the back posts, so it was time to do a fitting.  A couple of the rails are a bit thick at the joint, so some adjustments will be needed.

The observant will note that the front top rail is lower than the side rails.  This is for 2 reasons.

1 - It strengthens the joint since the holed for the rails won't meet
2 - Comfort.  A woven seat is more comfortable if the front rail is down from the side rails. It keeps the rail from pressing on the underside of your leg quite so much.

Next up - decorative drilling!